Crane Hire Perth › Bayswater
Crane hire in Bayswater: light industry and workshops in the pockets off the Tonkin corridor, trusses and spas in the established streets, ten minutes up the highway from our yard.
Since 1974 · 60+ cranes · 2.93–800t · CICA member
Bayswater balances old and new Perth: established homes on leafy streets, light-industrial pockets that keep workshops, wholesalers and trade businesses busy, and the Tonkin Highway running its eastern flank straight past our door. At about ten minutes from the Kewdale yard it is one of our closest northern-of-the-river suburbs, and it books like it.
The work splits accordingly: machinery, racking and rooftop plant in the industrial pockets, trusses, spas and renovation steel in the streets. Where a job sits near the rail corridor, approvals and clearances get built into the plan, and as with the rest of the airport’s surrounds, taller lifts are checked against Perth Airport’s protected airspace before the day.
Every Bayswater job gets the right crane for the lift, picked from the Perth fleet at our Kewdale yard: 2.93 tonne mini cranes through to 800 tonne heavy lift.
Reliable Franna cranes that pick a load and drive it across site, the workhorses of residential, commercial and yard work in tight spaces.
The top of our capacity range, including Liebherr models up to 800 tonnes. Road mobility plus serious lifting height and radius for major work.
Quick set-up and good reach, with the load and the crane arriving together on the one vehicle.
Tadano cranes purpose-built for unsealed, uneven and remote WA sites where standard mobile cranes can’t work.
Sustained heavy lifting on the one site, with tracked stability for long-duration work.
Compact cranes built for restricted-access work in built-up parts of Perth.
One of the first decisions on any project, and Joyce Krane offers both from Perth.
What we call taxi crane hire: the crane arrives with our own licensed operator and crew. The simplest, safest option for most one-off lifts.
You hire the crane and supply your own appropriately licensed operator. Best for established contractors needing a machine for an extended period.
A major strength of our Perth operation is the Joyce Krane Heavy Lift Division, based in Kewdale and operating Australia-wide. It runs high-capacity Liebherr all-terrain cranes including the LG 1800 and LTM 1750-9.1 at 800 tonnes, the LG 1750 at 750 tonnes and the LTM 1400-2.1 at 400 tonnes.
This is the fleet behind genuinely complex work: our teams have lifted over two hundred bridge beams and installed around three hundred wind turbine generators across construction, infrastructure, maritime and renewable projects. If your project sits beyond standard mobile crane capacity, talk to us early.
Heavy lifts reward planning.
Every Joyce Krane lift is backed by our in-house engineering team. Our engineers help you work through the craneage requirements of an upcoming special lift or future project.
They provide an unbiased, third-party review with clear recommendations, procedures and methodology designed to make the lift safer and more efficient. For Perth builders and project managers, that means you’re not just hiring a crane, you’re hiring the expertise to use it correctly.
Fifty years of lifting in some of Australia’s toughest environments. Trusted by major operators including Chevron, Rio Tinto and BHP.
Bayswater is about 10 km by road from our Kewdale yard, about 10 to 15 minutes up the Tonkin Highway. Short travel keeps both industrial and residential lifts inside sensible minimum hires.
Kewdale yard · about 10 km by road to Bayswater
Crane hire in Bayswater is priced on the crane size, how long the lift takes, site access, and whether you need wet hire (crane with our licensed crew) or dry hire. Bayswater’s short run keeps travel negligible, so quotes come down to access: driveway, verge, trees and wires, all readable from a couple of photos. Most bookings run on a minimum hire period, and travel from our Kewdale yard is quoted honestly for Bayswater rather than padded. Call 1300 956 923 for a fixed price.
Lifting from private property in Bayswater usually needs no permit. If the crane must set up on a road, footpath or laneway, a road occupancy or standing plant approval from the City of Bayswater is generally required, along with traffic control, and Main Roads WA approval can apply on classified roads. Bayswater sits within Perth Airport’s wider protected-airspace footprint, so unusually tall lifts are checked against the airport’s requirements, and work near the rail corridor carries its own clearance rules, both handled in the lift plan. We arrange the permits, traffic management and lift plan as part of the job.
Our Perth yard at Kewdale is about 10 km by road from Bayswater, about 10 to 15 minutes. Ten minutes up the Tonkin makes Bayswater a genuine quick-response suburb for us. For urgent and after-hours work, our 24/7 emergency crane service covers Bayswater as well.
Tell us the load, the Bayswater site and the timeline, and we’ll recommend the right crane and a safe, cost-effective plan to get it placed. Our Perth team is at 455 Belmont Avenue, Kewdale WA 6105.
